17
3. Wind the Rower Belt onto the Belt/Bungee
Pulley until the Rower Handle is as it’s fur-
thest forward position.
Rower Handle
Belt/Bungee Pulley
4. Rethread the Bungee Shock Cord (on op-
posite side of the Idle Wheel) back through
the Bungee Pulleys, the Mid Leg, reattach
Bungee Hook End Frame and Clip onto
Rear Leg.
Bungee Shock Cord
Bungee Pulley
Recoil tension can be simply adjusted to suit each user. To adjust, simply push the Inner Clip
out of the Bungee Hook End Frame from behind, pull the required amount of bungee through
the Inner Clip and replace the Inner Clip into the Bungee Hook End Frame.
Inner Clip
Bungee Hook End Frame
Hint:
Before reattaching the Inner Clip/
Bungee Hook End Frame, tie a slip knot un-
der slight tension at the rear of the Mid Leg.
This will keep the bungee under tension
while reassembling the Bungee Hook End
Frame.
Summary of Contents for Viking AR Rower
Page 1: ...1 Owners Manual ...
