background image

21  

 

VIKING AR ROWER

 

INTERNATIONAL WARRANTY – 

LIGHT COMMERCIAL USE**

  

 
**Light Commercial Use

 - This product is designed and constructed for use in supervised facilities 

where the product is used for less than 25 hours per week in total.  It is not intended or warranted for 
general use in Health Club / Fitness Studio application. 

 
First Degree Fitness Limited warrants that the 

Viking AR Rower (model VIKAR)

, purchased from an 

authorised agent and in its undamaged original packaging, is free from defects in materials and work-
manship.  First Degree Fitness Limited or its agent will, at their discretion, repair or replace parts that 
become defective within the warranty period, subject to the specific inclusions and exclusions below.   

 

Wooden Frame – 5 Year Limited Warranty 

 

First Degree Fitness Limited will repair or replace the wooden Main Frame of the Rower should it fail 
due to any defect in materials or workmanship within 5 years of the original purchase.  Warranty does 
not apply to frame coating.   

 

Polycarbonate Tank & Seals – 3 Year Limited Warranty 

 

First Degree Fitness Limited will repair or replace the polycarbonate tank or seals should they fail due to 
any defect in materials or workmanship within 3 years of the origi-nal purchase.   

 

Mechanical Components (of a non-wearing nature) – 2 Year Limited Warranty 

 

First Degree Fitness Limited will repair or replace any mechanical component should it fail due to any 
defect in materials or workmanship within 2 years of the original pur-chase.  

 
Specific Inclusions 

 

Aluminum Seat Rail (excludes discolouration from seat wheel action)  
Stainless Steel Paddle Assembly 

 

All Other Components (of a wearing nature) – 2 Year Limited Warranty (Home use) or 1 year 
(Light Commercial use) 

 

First Degree Fitness Limited will repair or replace any component should it fail due to any defect in ma-
terials or workmanship within 1 year of the original purchase.  

 

Specific Inclusions  

Bungee recoil cord  
Hand grips & foot straps 
Polyester rowing belt 
Seat 
All pulleys, rollers & bearings 
All rubber components  
Computer & speed sensor (excluding replaceable batteries) 
Sliding footplates 

 

General Exclusions 

 

Damage to the finish of any part of the machine 
Damage due to neglect, abuse, incorrect assembly or use of the machine 
Any charges for freight or customs clearance associated with the return or dispatch of parts 
Any damage to or loss of goods during transport of any kind 
Any labour cost associated with a warranty claim 

 

General Conditions 

 

● 

The serial number of the machine must be correctly registered with First Degree Fitness Limited or 
one of its appointed distributors    

● 

First Degree Fitness Limited reserve the right to examine any part where replacement is claimed 
under warranty   

● 

Warranty period applies only to the original purchaser from the date of purchase and is not transfer-
able  

● 

The product must be returned to your place of purchase in original packaging with transportation, 
insurance and associated charges paid for by you and risk of loss or dam-age assumed by you  

● 

First Degree Fitness makes no other warranties except as stated here and expressly disclaims all 
warranties not stated in this warranty. Neither First Degree Fitness nor its associates shall be re-
sponsible for incidental or consequential damages 

● 

Manufacturer's warranty automatically commences upon sale of the product to end user or upon the 
expiration of one (1) year from month of manufacture, whichever occurs first 

Summary of Contents for Viking AR Rower






















Reviews: