5
Steps 1 and 2:
Mount the Rower Seat onto the Seat Rail as shown, making sure the seat indentation is facing rearward
as shown. Next, using 2x M6x10 Bolts and Rubber Bumpstop, install the Bumpstop on the underside of
the Seat Rail with beveled edge facing forward.
Steps 3 and 4:
First, position the Seat Rail Insert inside the Seat Rail
. Next, insert 2x M10x180mm Seat Rail
Bolts through the top of the Seat Rail, the Seat Rail Insert, the Upper Leg and finally into the Lower
Leg metal threaded inserts. Tighten assembly and then install the Rubber End Cap into the Seat
Rail.
Note:
Bungee hook must face forward.
Seat Rail Insert
M10x180mm Bolts
Rubber End Cap
Upper Leg
Lower Leg
Rear Leg Assembly
Failure to install the seat rail insert
will damage the seat rail during
use
Completed Assembly
Seat Rail
Beveled Edge
M6x10mm Bolts and
Rubber Bumpstop
Indentation
Rower Seat
Bungee Hook
Summary of Contents for Viking AR Rower
Page 1: ...1 Owners Manual ...
