16
Detaching the Rower Belt:
1.
To detach belt, simply pull beyond the range of the normal rowing stroke until the belt
detaches from the belt bungee pulley.
Tip:
You’ll hear the Velcro separating just before the belt detaches.
Reattaching the Rower Belt:
2. Next, thread the Belt around the Idle Wheel as shown. Once around the Idle Wheel, attach the Rower
Belt to the Belt/Bungee Pulley. There is an obvious “lip” at the attachment point.
Velcr
o faci
ng up
ward
Idle Wheel
1. Begin reattaching the Rower Belt by threading around the Rower Belt Pulley with the Velcro side
facing upward as illustrated.
Bungee Hook End Frame
Inner Clip
2. Unhook the Bungee Shock Cord from the Rear Leg.
Then, push out the Inner Clip from the Bungee Hook End
Frame. Pull the Bungee through the Inner Clip until free.
This will allow for the Bungee Shock Cord to be threaded
completely out of the Main Frame and up to the Belt
Bungee Pulley where it will be re-attached once the
Rower Belt is in the proper position.
Summary of Contents for Viking AR Rower
Page 1: ...1 Owners Manual ...