Before you permanently install
4
Box contents for a HotPort 5020-M mesh node
The HotPort 5020-M mesh node box contains these items:
•
One HotPort mesh node with an attached mount plate and bracket
•
Two 5 dBi omni-directional staging antennas
Caution.
Do not use staging antennas outdoors. The staging antennas
are rated for indoor use only and are recommended for pre-
configuration purposes only. If you use the staging antennas
outdoors, they can be damaged. Damage from incorrect deployment is
not covered by the product warranty.
•
Two RP-SMA to type-N adapters
•
Mount kit
-
U-bolts, M6x1.0-80mm, with flat washers, split washers, nuts
-
Claw-tooth pole grippers
-
M6x1.0-40mm hex bolt
-
M6x1.0-20mm hex bolt
-
Hex-head socket wrench
•
One DC power connector with waterproof backshell (field installable)
•
One 802.3at Power over Ethernet (PoE) injector
•
One AC power cable (USA type)
Note.
Country-specific power cords are available for purchase.
•
One weatherized RJ-45 connector with waterproof backshell (field
installable)
•
One Cat5e cable
•
Quick start sheet
•
Warranty card
!
