HotPort 5020-M node installation
23
Attaching a node to a horizontal pole
Recommended tool: hex wrench (included) or small adjustable wrench
To attach the node to a horizontal pole:
1.
Attach the two grippers and U-bolts to the pole. Use the bracket to
determine the correct space between the grippers.
2.
Use lock washers and nuts to secure the bracket to the U-bolts.
3.
Hang the node with the hooks over the rail of the bracket.
Hooks
4.
With the Phillips screwdriver tighten the four captive screws to secure the
node to the bracket.
The installation is correct if the node does not easily move from side to side,
and the connectors are oriented to the ground.
Note:
If you need to, add other straps or a sling to increase durability of the
attachment to the pole.
Best practice:
Use a spray to prevent corrosion on the bracket and mount
hardware.