Troubleshooting
39
9.
Set the country code for the node to change the device from a low-power,
low range setting to a correct full-power operational mode.
Caution:
Make sure you configure the device for the correct
country. If you do not configure the country correctly, the device
might operate in a manner that is not legal or create problems
with other wireless devices.
a.
Select the country of operation from the drop-down list.
b.
Click
Set Country Code Now
.
When you set the country code the system refreshes the mesh
configuration and gives all visible nodes the same country code.
For a few minutes the nodes might appear and disappear from the
graphic mesh record in HotView Pro.
c.
Wait for three minutes for the system to finish the refresh.
!
