Fireline FPW, Owner'S Manual

Page: 14 / 32

14 LT6498 (ISS 2)

The door can now be closed and safely
fastened using the Allen Screw at the
side making sure the seal around the
door is in the correct position.

The Gas Control knob can now be
fastened using the two screws of the
rear of the knob, it may be necessary
to turn the Knob to gain access. (Isolate
the Gas supply for safety).

Make a note of the “D” shape on the
valve spindle and the cut out on the
Gas Control knob.
SECTION FIVE General Points (Users Instructions)
Like all appliances incorporating an aerated burner a low frequency noise may be heard, particularly on the low
setting, this is quite normal and does not affect the operation of the appliance.
It is advised that a competent person service the Fireline FXW/FPW fire annually. The fire is more likely to provide
trouble-free operation.
Dulling and slight discoloration inside the firebox will occur adding to the realism of the appliance. This is normal.
It is important that: -

The chimney or flue is checked annually to ensure clearance of combustion products.

The fire must never be operated with the door open.

Any debris from the chimney or flue should be removed. The fire should be allowed to cool before it is
removed.

The fire must not be used if the glass panel is missing or damaged.

The data badge is located on the appliance base.
The only user removable parts are: -

Refractory Fire bed Components.

Glass panel.