www.charltonandjenrick.co.uk
11
LT6498 (ISS 2)
Place the LH1 (shorter log) and RH2
(longer log) Rear Log shapes at the back
of the Air Tray with the cut outs at the
back and the Bark effect at the Top so
they lie on the pointed edge.
Position the shapes so the bottom “V”
of the shapes are between the first row
of Air Holes and the second row of Air
holes behind the burner bar.
Place a single layer of Bark Chips in
front of the Burner Bar making sure not
to cover or obstruct the Pilot assembly
or rest too far onto the Burner Bar.
Summary of Contents for FPW
Page 28: ...28 LT6498 ISS 2 ...
