FINAL PREPARATION
INSTALLING MEDIA
Install media (Firegear GR glass) into the burner pan.
Ensure the media used is minimum ⅜” to ¾” crushed
glass as a base.
Install the crushed glass into the burner trough (box
surrounding the burner tube). Fill the trough to the top
edge with your crushed glass. Media must stop at the
top edge of the trough. After filling the trough reinstall the
mesh hood overtop of the pilot area.
NOTE:
In some
cases you may have more media than needed for the
“trough only” applications, depending on the model.
Once the burner trough if filled the remaining inside floor
area of the fireplace can be covered with rock, matching
glass or Firegear GL glass to blend the entire firebox per
the shaded area in Fig. 23.
IMPORTANT:
When filling the remaing fire box with
media ensure no media falls down inside the pilot cover
area (Fig. 21, page 16). This is crucial to provide fresh
air to the pilot assembly and pilot covers (Figs. 20-21).
This provides even flow of combustion air on both sides
of the fireplace.
Crushed Glass
Over Burner
Additional Media Can
Cover Entire Floor
No Media on
Screen Hood
Fig. 22
Installing media into the fireplace.
Burner
Trough
3/8” - 3/4”
Crushed Glass
Fig. 23
Covering remain fireplace floor permitted
per shaded area.
REV. 1-5-17 Page 17
Kalea Bay Outdoor Fireplace
Media (Firegear GR glass) is not supplied with the Kalea
Bay Fireplace however it is required to be installed in the
trough area of the burner and optional to fill the entire
burner area. This enables the homeowner to choose their
own color glass. Use the table below to determine the
amount of glass required for your model.
Model #
Entire Burnerpan Trough Only
OFP-L36TFS
25# (5 bags)
4# (1 bag)
OFP-L48TFS
35# (7 bags)
5# (1 bag)
OFP-L60TFS
40# (8 bags)
6# (2 bags)
OFP-L72TFS
50# (10 bags)
7# (2 bags)
Table 9
Required media specifications
(Entire burnerpan column includes filing the trough)
Summary of Contents for OFP-L36TFS-N
Page 32: ...NOTES ...
