FireClass FC-P-S, Service And Maintenance Manual

Page: 7 / 38

FireClass Fire detection system FireClass Panels 2.3 Using the Menus
Service and Maintenance Doc. version 1 10
2.3 Using the Menus
Enable Keyswitch to ON . Press Passcode key (F3). Enter
the User ID and Passcode. Press Enter if the passcode
contains only 4 digits. If the passcode contains 6 digits, the
log in information screen automatically leads to the Main
Menu screen.
You now see the Main Menu shown in Fig. 1. Note how the
Menu key (F1) has been replaced with a Back key, for
exiting menus.
Most of the menu options are only available once you have
logged on. Fig. 1 shows all the options. If you have one of
the lower access levels, you may not see all these options.
„
Forced Points 12 Engineer
Service menu
see User guide Supervisor
„
Maintenance 13 Engineer
– Counters 13 Engineer
– Maintenance Request 14 Engineer
– Battery Test 14 Engineer
– S/W Init. Count 14 Engineer
– Project Numbers 14 Engineer
– Software Versions 14 Engineer
„
Diagnostics 15 Engineer
– Force Dev.O/P 15 Engineer
– Force Dev.I/P 15 Engineer
– Shutdown/Rstart 16 Engineer
– Single Dev.Poll 16 Engineer
– Change Address 16 Engineer
„
Calibrate DDM 20 Engineer
„
Restart System 17 Engineer
„
Switches 17 Engineer
– Fast Fault Mode 17 Engineer
– Rate of Rise 17 Engineer
– Noisy Device 17 Engineer
– Detect. Power Up 17 Engineer
– RSM Test Mode 18 Engineer
– Inhibit No Resp 18 Engineer
Configuration menu 18 Engineer
„
Change Text 18 Engineer
„
Insert Point 20 Engineer
„
Delete Point 20 Engineer
„
Modify Point 20 Engineer
„
Autoconfig. 21 Engineer
Function See Page Minimum Access Level
Table 1: Functions and required access levels (cont.)