5.5 General Fault Overview
FireClass Fire detection system FireClass Panels
30
Service and Maintenance Doc.
version1
5.4.5
Point Section – COM2 Faults
When reported on the user interface or via printers, the out-
put format used for faults reported from COM2 are
‘COM2’.
5.4.6
Point Section – COM3 Faults
When reported on the user interface or via printers, the out-
put format used for faults reported from COM3 are
‘COM3’.
5.5
General Fault Overview
5.5.1
Fault Conditions On Devices
The table below lists the fault states possible for standard
points within FireClass. These are noted in the description
column. The group assignments are those assigned in the
FireClass Version 21.0 template.
COM2-Faults
This section refers to faults regarding COM2
which is the configuration or FireClass Remote
port.
Field
Description
Address
Pseudo Point 1
Label
Comms Fault
Use
Will give fault if packet Retries
exceed maximum (100).
Table 34: COM2-Details
COM3-Faults
This section refers to faults regarding COM3
which is used to connect to the network card.
Field
Description
Address
Pseudo Point 1
Label
Comms Fault
Use
Will give fault if packet Retries
exceed maximum (100).
Table 35: COM3-Details
