FireClass Fire detection system FireClass Panels
2.4 Clearing Panel Logs
Service and Maintenance Doc. version 1
10
6 Press the
+
key (F4) to increment the point number (or
press the
2
key):
7 Press the
Enter
key (F5) to display the point status:
For further options displayed on the View Status Menu,
refer to the FireClass User guide.
2.3.1
Network and Non-Network
Addresses
You will sometimes need to enter an address in the system.
For example, to view the status of a point you specify the
point address, using the type of screen shown in Fig. 9.
In this screen, note the
Panel 02
item (panel selection
option). This only applies to a networked system where
each panel has been configured using a network card
(TLI800EN).
In a non-networked system, you do not need to specify the
panel number (as there is only one panel), so the item does
not appear.
In some cases there is a separate screen for specifying the
panel number – again this will not be shown in a non-
networked system.
2.4
Clearing Panel Logs
Clearing the control panel logs simultaneously effects the
following:
Clearing the Event Log.
Resetting the Fire Cycle Count.
Resetting the Software Initialisation Count (The
Software Initialisation Count can also be reset
independently – for details see 3.6.2 “Insert Point“ on
page 20).
Resetting the time and date.
In the procedure below, the bold items are identified with
labels on the controller circuit boards.
Fig. 6: View Status Point Highlighted
Fig. 7: View Status Point Highlighted
Fig. 8: View Status Point
View Status
FireClass
Thu, 18-Aug-11
11:07
High Street Office
Point
Panel
01
Loop Point
A
General
Flt P 011
Back
>>
-
+
Enter
001
View Status
FireClass
Thu, 18-Aug-11
14:51
High Street Office
Point
Panel
Loop Point
A
General
Back
>>
-
+
Enter
002
View Status
FireClass
Thu, 18-Aug-11
11:27
High Street Office
Point
Zone 01.001 A002
Zone01
Call alarm in room
460PH
General
Flt P 011
Back
Input
Output
Normal
Fig. 9: View Status – Panel Number
CAUTION
Possible loss of important historical data.
Only use the resetting option below with care.
View Status
FireClass
Thu, 18-Aug-11
11:27
High Street Office
Point
Panel
Loop Point
A 001
General
Flt P 011
Back
>>
+
-
Enter
02
