FireClass FC-P-S, Service And Maintenance Manual

Page: 22 / 38

4 Default System Points FireClass Fire detection system FireClass Panels
22 Service and Maintenance Doc. version 1
4 Default System Points
4.1 Point Type Explanations
4.2 Local I/O (Field Interface
Module/CPU)
Point Type Explanation
Real point A physical input/output point
Pseudo point A software derived fault number,
for example for a communications
fault or RAM fault.
Timer Timer points are used to
automatically switch between day
and night mode.
The FireClass Express user sets the
times at which changes should take
place.
Table 2: Point Type Explanations
Point Detail
R01 SOUNDER 1
R02 SOUNDER 2
R03 ALARM RELAY
R04 FAULT RELAY
R05 PSU MONITOR I/P
R08 EMERGENCY ALARM I/P
R09 MP EARTH FAULT IP
R10 BATTERY FAULT I/P
R11 MAINS SUPPLY I/P
R12 CHARGER FAULT I/P
R14 I/O 2
R15 I/O 1
R16 24V RESET
Table 3: Local I/O Real Points
Point Detail
P01 DATA PACKET ERROR
P02 FIFO FULL
P03 EA FIFO FULL
P04 LNET DATA PATH FLT
P05 LNET MODULE FLT
P06 CONFIGURATION STORE
P07 FIM COMMS FAILED
P08 LOOP A FAILED
P09 LOOP B FAILED
P10 LOOP C FAILED
P11 LOOP D FAILED
P12 LOOP E FAILED
P13 LOOP F FAILED
P14 LOOP G FAILED
P15 LOOP H FAILED
P16 BAD PACKET LOCAL I/O
P17 BAD PACKET CHAN A
P18 BAD PACKET CHAN B
P19 BAD PACKET CHAN C
P20 BAD PACKET CHAN D
P21 BAD PACKET CHAN E
P22 BAD PACKET CHAN F
P23 BAD PACKET CHAN G
P24 BAD PACKET CHAN H
P25 FIM BAD PACKET
P26 FIM FAULT
P27 MP ROM FAIL
P28 MP SYSTEM RAM
P29 MP CLOCK
P30 MONITOR POINT
P31 BATTERY LOW
P32 RBUS CIRCUIT FAULT
P33 STACK OVERFLOW
P34 SYSTEM HEAP ERROR
P35 UNSUPERVISED PANEL
P36 REMOTE CONNECTED
Table 4: Local I/O Pseudo Points