manualshive.com logo in svg

Fire-Lite MS-9200C, Instruction Manual, Page: 9 / 92

Share
Download
Fire-Lite MS-9200C Instruction Manual Download Page 9

                  Document #51003     Rev.E     01/11/02     P/N 51003:E

9

Product Description

CHAPTER 1

Product Description

The Fire•Lite MS-9200(C) is a compact, cost effective, addressable FACP (Fire Alarm Control Panel) with an exten-
sive list of powerful features.  The combination of Fire•Lite's newer series devices and legacy 300 Series Addressable 
Devices, along with the MS-9200 FACP offers the latest in fire protection technology.  The power supply and all elec-
tronics are contained on a single circuit board housed in an attractive metal cabinet, providing a complete fire control 
system for most applications.  Optional modules, which plug into the main circuit board, are available for special 
functions.  Available accessories include LED, graphic and LCD annunciators, digital communicator, local down-
loading software and remote power expansion.  The MS-9200E offers the same features as the MS-9200(C) but 
allows connection to 220/240 VAC input.

Note: Unless otherwise specified, the term MS-9200 is used in this manual to refer to both the MS-9200(C) and the 
MS-9200E FACPs (Fire Alarm Control Panels).

1.1

Features

• Single standard SLC loop which meets NFPA Style 4, 6 and 7 requirements

• 198 addressable device capacity (99 detectors and 99 monitor/control modules)

• 56 software zones

• Two main circuit board NACs (Notification [bell] Appliance Circuits) expandable via control modules

• Optional RTM-8F eight zone relay module with local energy/reverse polarity transmitter

• Optional ACM-8RF Relay Control Module

• Printer/PC Interface

• 3.6 amps system power expandable to 6.6 amps

• 3.0 amps NAC power expandable to 6.0 amps

• 40 character LCD display (backlit)

• Real-time clock/calendar

• History file with 500 event capacity

• Advanced fire technology features:

✓

Automatic device type-code verification

✓

Addressable smoke detector data printout

✓

Auto detector test

✓

Maintenance alert

✓

Point trouble identification

• Waterflow (nonsilenceable) selection per module point

• Supervisory (latching or auto-resettable) selection per point with separate system LED.  

Note that the 

auto-resettable feature is only available for panels with software version #M9200V20 or later.

• System alarm verification selection

• Walktest with report of two devices set to same address

• Presignal per NFPA 72

• Annunciators

✓

ACS LED Zone Annunciator Series

✓

LDM Graphic Annunciator Series

✓

LCD-40 Series Liquid Crystal Point Display Annunciator

• Silence inhibit timer option

• Autosilence timer option

• Continuous/March Time/Temporal or California code for main circuit board NACs

Summary of Contents for MS-9200C





























































































Reviews:

No comments