162
MS-9600LS Series Manual —
P/N 52646:B2 2/12/2010
Operating Instructions
Read Status
4.22.1 System Point
Pressing
1
while viewing Read Status Screen #1 will cause the following screen to be displayed:
The operator selects the loop containing the device to be read by pressing
1
for Loop 1 or
2
for
Loop 2. The following screen will then be displayed:
The operator now selects the type of device which is to be viewed by pressing
1
for Detector or
2
for Module. If
1
is pressed, the display will change to the following screen:
Entering the three digit detector address will cause the control panel to display the current status of
the selected device. For example, if a detector with address
001
on loop
1
is entered, a display sim-
ilar to the following will appear:
The information in the preceding display includes:
•
NORMAL
- the present status (could also be ALARM, TROUBL, DISABL, etc.)
•
SMOKE (PHOTO)
- the device type which is a photoelectric smoke detector (could also be
ION for ionization smoke detector)
•
NORTH CLASSROOM
- the Adjective/Noun label for this device
•
Z005
- the first of five possible assigned software zones
•
1D001
-
1
= Loop 1,
D
= Detector,
001
= Address 001
READ STATUS
1=SYSTEM POINT
2=ZONES
3=POWER
Read Status Screen #1
READ SYSTEM POINT
SELECT LOOP
1=LOOP 1
2=LOOP 2
READ SYSTEM POINT
SELECT TYPE
1=DETECTOR
2=MODULE
READ SYSTEM POINT
ENTER DETECTOR#
***
NORMAL SMOKE(PHOTO)
NORTH CLASSROOM
Z005
1D001
