manualshive.com logo in svg

Fiori BATCH CONTROLLER, Use And Maintenance Manual

Share
Download
Fiori BATCH CONTROLLER Use And Maintenance Manual Download Page 81

81

REV. 00         02/01/2015

id.:

CBV ADVANCED 

DOUBLE ADDITIVE FEEDER

7

REV. 01         24/03/2015

The litre counter with electromagnetic fl ow meter is a device which measures the quantity of liquid fl owing 
through it.
Based on an electromagnetic measurement principle (there are no moving mechanical parts inside it), it dis-
plays a signal which is proportional to the liquid that fl ows through it.
The display shows a capacity value, calculated based on the data received from the litre counter and on the 
value of the constant set by the manufacturer during machine assembly.

CAUTION: This device has been designed for industrial applications. The litre counter MUST NOT, 

under any circumstance, be used for measuring the fl ow of hydrocarbons, fl ammable, 
explosive or toxic liquids, as provided for by Directive  67/548/EEC dated 27/06/1997.

CAUTION: If additives have different densities or special features, they may distort the litre counter 

calculation. Use the additives most commonly used.

7.2  REFERENCES AND  DESCRIPTIONS OF THE MAIN DEVICES  

(fi g. 1). 

 

The parts that control additive feeding and distribution are the following:

A -  Litre counter

B  -  Additive suction pump

    1st additive (

L2

), pump for tank 1

    2nd additive (

L3

), pump for tank 2

C  -  Pump management device

    It is connected to the pump and managed by Fiori Batch Controller. It activates and deactivates the addi-

tive loading to the preset values.

D  -   Additive tanks

  Tank 

1

  Tank 

2

-  Liquid pump with rubber membrane.

-  Maximum fl ow rate ............................................................................................................. 7.6 l/min at 0.7 bar

-  Maximum pressure  .............................................................................................................................. 4.2 bar

-  DB260 2 tanks, quantity for tank  .......................................................................................................  9.7 litres

-  DB460 2 tanks, quantity for tank  ........................................................................................................  15 litres

7.1  TECHNICAL DATA

 

1

A

B 

(1°)

C

B 

(2°)

D 

(1)

D 

(2)

Summary of Contents for BATCH CONTROLLER





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands