manualshive.com logo in svg

Fiori BATCH CONTROLLER, Use And Maintenance Manual

Share
Download
Fiori BATCH CONTROLLER Use And Maintenance Manual Download Page 73

73

REV. 00         02/01/2015

id.:

ALARM LIST

5

5.1 

 

OPERATING ALARMS 

These alarms are displayed in a yellow box on the active page.

They may be generated during the components loading operations.

  MACHINE TILTED TOO MUCH  

excessive tilting of the machine along the front axis

  CORRECT THE INCLINATION  

correct the front tilting of the machine

  LOWER BOOM AND REPEAT  

slowly lower the boom and repeat the operation

  WEIGHING ERROR  

weighing error

  EXCESSIVE VIBRATION  

the system has detected an excessive weight vibration during weighing

  LOWER BOOM AND REPEAT  

slowly lower the boom and repeat the operation

  WEIGHING ERROR  

generic weighing error

  LOWER BOOM AND REPEAT  

slowly lower the boom and repeat the operation

  NON EMPTY BUCKET  

the load has not been poured completely into the drum

  FULL DISCHARGE BUCKET IN DRUM   Lift the boom back up again and pour the load in the drum
  ESC TO ABORT  

press ESC to cancel the error

  EXCESSIVE LOAD  

the total load of the component exceeds the preset value

5.2 

 

SYSTEM DIAGNOSTICS ALARMS

 

alarm messages related to the peripheral devices

These alarm messages are signalled by a triangle on the up right corner of the screen and are 
accompanied by an acoustic signal.

progressive number (1 of / ....)

alarm code 
(refer to alarm 
table)

description

solution

Summary of Contents for BATCH CONTROLLER





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands