16
REV. 00 02/01/2015
id.:
FBC
MODE FUNCTIONS
3
Press the key to access the water management menu.
There are two different modes available for using the water:
A) Washing water
Normally used to wash the machine. The system does not count the amount of supplied water.
To activate the supply of washing water:
- Select “WASHING MODE”
- Press
or
To stop the water supply:
- Select “WASHING MODE”
- Press
again or
First stop threshold during the
water loading phase
B) Recipe water
You may set the threshold (%) at which the system will stop loading water during the fi rst loading phase.
3.6 WATER MANAGEMENT
3.7 AUTOMATIC WATER LOADING
Select the “WATER” component
Press OK
(a message is displayed)
Press OK
again to confi rm or ESC
to
return to the previous step.
When the OK key is pressed, the water loading phase
starts; the loading progress is visible.
The water loading phase may be started through an
external device (Mix control); the device automatically
turns the pump off as soon as the preset value is
reached.
The water loading phase is carried out until the
set threshold is reached (e.g. 70%).
The remaining water will be loaded at the end of the loading phase by repeating the automatic water
loading operation.
3.8 MANUALLY LOADING A COMPONENT
Press the navigation keys to select the
desired component. Manually insert the
component in the drum .
Press the manual loading key.
A
B
