46
REV. 00 02/01/2015
id.:
CBV ADVANCED
MODE FUNCTIONS
3
3.13 CANCELLING LAST WEIGHING
If the preset weighing value is exceeded, before pouring the material you may:
Press the indicated key to cancel the weighing, then lower the bucket to pour some material and
repeat the loading operation of the component through weighing.
3.14 TIP-OFF (dynamic weighing)
If the preset weighing value is exceeded, before pouring the material you may:
Press the indicated key to shift to the dynamic reading, then open the pouring door located on the
bucket and pour the material until the preset value is reached.
Press the button (A) on the joystick and shift it to the
left to open the hydraulic loader hatch and unload the
quantity of material necessary to reach the required
weight.
Shift the joystick to the right to close the hatch.
N.B.: Do not move the arm during tip-off; take into
account the weight shown in position ‘1’, always moving
the bucket to the same point where it was at the time of
activating the tip-off function.
N .B.: the precision of the weight in “Tip-Off” mode is
usually less than the one in standard conditions
3.12 LOADING PROGRESS INDICATORS
The loading progress for each individual component is displayed by means of:
- loading progress bar (from 50% to 100%)
- progressive acoustic signal (from 50% to 100%)
A
