Finn HydroSeeder T120, Parts And Operator'S Manual

Page: 15 / 79

1. Discharge Through Boom:
Flow is through boom with no flow through
closed recirculation valve (Figure 2). Flow
through boom is controlled by engaging and
disengaging slurry pump clutch. Do not use the
discharge valve to control distance. Valve
should be either completely open or complete-
ly closed. Control the spray volume and spray
distance by adjusting the engine RPM.
2. Extension Hose Through Boom:
Flow is through boom with no flow through
closed recirculation valve (Figure 2).
Extension hose is connected to boom and flow
is controlled by engaging and disengaging
pump clutch, or controlling the speed of the
engine.
Figure 2
DANGER: Do not use remote valve in this application.
3. Extension Hose or Hose Reel
Through Remote Port:
Flow is through recirculation with no flow
through closed discharge valve (Figure 3).
Flow through extension hose is controlled by
engaging and disengaging slurry pump clutch,
or by remote valve at end of hose. Open recir-
culation valve allows flow back into tank.
Figure 3
DANGER: Recirculation valve must be open and material flowing back
into tank when using a remote valve. A closed or plugged
recirculation line will cause extreme heat resulting in damage
and/or bodily injury.
11