Finn HydroSeeder T120, Parts And Operator'S Manual

Page: 55 / 79

AGITATOR ASSEMBLY
Ref. No. Part Number Description No. Req’d
T90 T120 T90 T120
007420 007420 Bearing Assembly 2 2
1 007417 007417 Spacing Ring 1 per 1 per
2 007416 007416 Shaft Seal 1 per 1 per
4 007212 007212 Flangette 1 per 1 per
5 003022 003022 Bearing 1 per 1 per
6 007211 007211 Flangette w/Lube Coupling 1 per 1 per
7 012605 012605 Bevel Sealing Washer 4 per 4 per
8 Y08SS Y08SS Agitator Nut 4 per 4 per
9 X0828SS X0828SS Agitator Bolt 4 per* 4 per*
10 007705 007705 Grease Fitting 2 2
012519 012519 Grease Line Elbow (Not Shown) 1• 1•
012520 012520 Bulk Head Fitting (Not Shown) 1• 1•
012521 012521 Grease Line Hose (Not Shown) 1• 1•
11 005214 ———— T90 Agitator Shaft Assembly 1 -
12 ———— 005215 T120 Agitator Shaft Assembly - 1
13 005080 005080 Main Agitator Section w/Paddle 1 1
14 005081-02 005081-02 Agitator Stub Shaft, Drive 1 1
15 005027-01 005027-01 Bolt-On-Paddle, Rear 1 1
16 005027-02 005027-02 Bolt-On-Paddle, Rear w/Hole 1 1
17 ———— 005111 Front Agitator Extension - 1
18 005027-03 005027-03 Bolt-On-Paddle, Front 2 3
19 005081-03 ———— Agitator Stub Shaft 1 -
20 X0824 X0824 1/2-13 UNC HHCS x 1-1/2 Lg. 8 6
21 X0820 X0820 1/2-13 UNC HHCS x 1-1/4 Lg. - 4
22 X0828 X0828 1/2-13 UNC HHCS x 1-3/4 Lg. 4 6
23 Y08L Y08L 1/2-13 UNC Lock Nut 12 16
24 W08F W08F 1/2 Flat Washer 6 10
NOTE • 1.) #012519, #012520 and #012521 Grease Line Components Have Quantity 2
per, on all Skids.
* 2.) On T90 Series II and T120 Series II the quantity of part number X0828SS is
a total of eight per unit, except for the T90 Series II trailer unit, which replaces
two of this part for part number X0840SS. The two replacement bolts are used
on the lower two bolts on the front of the unit to hold the toe guard.
51
WHEN ORDERING PARTS, BE SURE TO STATE
SERIAL NUMBER OF MACHINE
LBT90-SS
Parts Department: 1-800-229-8707