Finn HydroSeeder T120, Parts And Operator'S Manual

Page: 36 / 79

TROUBLE SHOOTING YOUR HydroSeeder
®
(continued):
Problem Probable Causes Suggested Solutions
Suction partially plugged. Clean out machine see page 20.
Nozzle worn or plugged. Clean nozzles, replace if necessary.
Fertilizer. Change type.
Clutch slippage. Readjust clutch page 27.
VALVE:
Valve stuck. Frozen. Thaw out ice, lubricate. Leave in
discharge position during storage.
Constant plugging Foreign material in slurry. Drain and clean out tank. Check
during operation. storage for foreign materials.
Constant plugging Loading HydroSeeder® Reinstruct your operator. (See
during loading and before tank is half full page 15).
discharging. of water.
Incorrect loading procedure. Review loading procedure page 15.
Improper operation by Reinstruct your operator. (Review
operator. Operator’s Manual).
Clutch slipping. Readjust clutch see page 27.
Not moving valve handle Valve should be fully open.
far enough.
Machine not being flushed See page 15.
out prior to reloading.
Machine not being run at Reinstruct your operator. (See
correct RPM during loading. page 15).
Extension hose plugs Letting water run out, If hose has to be uncoupled, seal
after use. leaving wood fiber mulch ends to keep water in hose and
to dry out. prevent wood fiber mulch from
drying out.
CLUTCH:
Does not pull load or Out of adjustment. Readjust clutch, instruction on
overheats. page 27.
Jumps out of engagement. Too loose or too tight. Readjust clutch see page 27.
32