Finn HydroSeeder T120, Parts And Operator'S Manual

Page: 14 / 79

TWO VALVE OPERATION:
This HydroSeeder
®
is equipped with two independently operated ball valves to control slurry flow. One is
located in the recirculation line below the platform, and the other is located in the discharge line above the
platform. The recirculation valve is open when the handle is in line with the valve ports and is closed when
the handle is at a right angle to the valve ports. The discharge valve is open when the “v” notch in the foot
pedal is in line with the valve ports and is closed when the “v” notch is at a right angle to valve ports.
WARNING: Never engage the slurry pump clutch when both valve handles
are positioned as shown Figure 1. Both valves are closed and
will result in extreme heat generation that will cause damage or
bodily injury if the slurry pump is running.
Figure 1
10