Finn HydroSeeder T120, Parts And Operator'S Manual

Page: 12 / 79

4. Fill pumps with the capacity of 5,500 GPH (19,000 l/h) or 9,000 GPH (34,000 l/h) can either be
carried on the truck or mounted on the HydroSeeder
®
.
5. Hardened pump parts. Pump casing, impeller, and suction cover treated with special material
designed to resist wear.
6. Rear spray bar. The spray bar option is not designed for slurry application but for the dispersion of
liquids for dust control, watering, feeding and washing applications. Rear spray bar can be arranged
so that operation is remotely controlled from the truck cab.
PRE-START CHECK:
Safety check to insure operator safety:
1. A. Skid Unit - Check condition of all mounting hardware securing HydroSeeder
®
to truck frame
rails.
B. Trailer Unit - Inspect hitch, safety chains, lights, brakes and breakaway switch.
2. Make sure bag cutter is in place and secure.
3. Inspect that all railings are in place and secure.
4. Insure that all guards are in place.
EQUIPMENT CHECK:
CAUTION: Equipment check is made with the engine off and all rotating
parts stopped.
1. See that tool kit contains all the prescribed items (see tool kit list in parts book page 69).
2. Inspect the “slurry-tank” for foreign objects. See numbers 2 and 3 in Maintenance Section (IV) of
the Safety Summary Section page 4.
3. Check fuel level.
4. Check the hydraulic oil level (see hydraulic system page 21 for oil specifications).
5. Check engine oil level...for oil type refer to the engine manual.
6. Check fluid level in radiator and overflow tank.
7. Inspect air cleaner for dust and dirt, clean if necessary.
8. Secure the drain plug on the outside-bottom of the slurry-tank.
9. Check to be certain pump drain plug is in place.
10. Verify that suction line shut-off valve is completely open.
8