fine EP-Q2036HW-IP-AT, User Manual

Page: 25 / 78

23
system setting
camera parameters
pan tilt setting
display configuration
motion detection
alarm setup
OPERATION
INSTRUCTION
Dome can operate by the key on the keyboard,
combine of the key or by OSD menu. OSD menu can
be activated by preset 95# call. Preset calling can
operate by the keyboard or any device that can send
the common (eg. computer).
OSD menu operation as follow:
■BOOT-UP THE SCREEN
When power on or restart the dome, the boot up
information will display on screen and then the dome
will conduct self-testing. It will last about 40 seconds.
“System booting up” will show on the screen until
“boot-up success” show up. This screen display
disappears once the dome receive any effective
command or 2 minutes later.
■WORKING MENU AS FOLLOW
The dome shows the below information when it working
by the OSD menu,

Dome Title

The first line in the screen shows Dome title 1 and
title 2.

Preset Title
The second line in the screen shows the preset title 1
and title 2.

System time
The right side of the reciprocal forth shows the
system time.

System date
The right side of the reciprocal third shows the
system time.

Zone title
The reciprocal second shows the zone title 1 and
title 2.

Position
The left side of the reciprocal first shows the dome
position and pan tilt angle.

Zoom times
The middle of the reciprocal first shows the zoom
times.

Temp. and fan speed
The right side of the reciprocal first shows the dome
internal temp and fan speed. XXC/XXF C
：
centigrade
；
F
：
Fahrenheit
；
rpm : revolution per
minute
■ MENU OPERATION
■ ENTER THE MAIN MENU

It can show the main menu by call preset 95#
Note: For the third party keyboard, please read the
instruction to confirm the method of call preset.
Different factory use different method.

The users should input the password to enter the
menu when the password protection action.(The
default password is 000000)

Move the joystick up or down to select 0-9, move the
joystick right or left to select the digits, then press
(IRIS OPEN) to confirm. If the password is wrong,
the screen disappear automatically.
If you stop operate above 1 minute, the menu will
close automatically. It will store the menu setting
once the power off.
■
SELECT THE MENU ITEM
The cursor shines in the left of the menu item in the
main menu. Move to the cursor up or down to select
the menu item. Press
【
iris open
】
to enter the menu
item, press
【
iris close
】
to cancel the operate or back
to last menu.
Serial number 000001AC78B2
Dome ID
001
Baud Rate 4800bps
Protocol PELCO_P
Camera FCB-EX1010
Version A0.06
Fan speed 8020
Temperature +33C/91F
Dome Title 1
Dome Title 2
Preset
Title 1
Preset
Title 2
00
：
10
：
00