Chapter 2: Operating Your FT-70/75
2-9
Aligning the Missing Cap Sensor
Figure 2-4.
Aligning the Missing Cap Sensor.
The Missing Cap Sensor is mounted on the Centerline Trigger
Bracket, therefore before you align Missing Cap Sensor be certain
the Centerline Trigger Bracket is aligned properly. For more infor-
mation see “Adjusting the Centerline Trigger Bracket Height” on
page 2-7.
1.
Turn off the Safety Interlock Switch. For more information see
“The Safety Interlock Switch” on page 2-4.
2.
Loosen the bottom jam nut on the Missing Cap Sensor.
2
3
1
4
5
6
No.
Description
1
Missing Cap Sensor
2
Container Cap
3
Container Travel
4
Distance between Cap and Sensor
5
Upper Locking Nut
6
Lower Locking Nut
Industrial Dynamics Company, Ltd. Document 40274-0600
