Fike FVA-IP, Installation And Operation Manual

Page: 5 / 56

FVA-IP Camera Installation and Operation Manual
Revision Date: June, 2019 P/N 06-523 (Rev. 5) 1
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions. Keep these instructions
2. Head all warnings. Follow all instructions
3. Do not use this camera near water. Clean only with dry cloth.
4. Install in accordance to the manufacturer’s instructions
5. Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
6. Only use attachments / accessories specified by the manufacturer.
7. Refer all servicing to qualified service personnel. Servicing is required when the camera has been damaged in
anyway.
8. WARNING: To reduce the risk of fire or electric shock, do not expose this camera to rain or moisture.
9. Installation should be done only by qualified service personnel and conform to local codes.
10. Ensure that the camera is securely mounted. Use installation methods and materials capable of supporting
four times the maximum specified load.
11. Only power with 12‐24 VDC (UL), 12 VDC (FM) from UL listed Class 2 power supply for security or fire should
be used. POE may be used as supplemental to the listed 12 or 24 volt power supply.
12. Please thoroughly familiarize yourself with the information in this manual prior to installation and operation.
13. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operations.
14. This Class A digital apparatus complies with Canadian ICES‐003. Cet appareil numérique de la classe A est
conforme à la norme NMB‐003 du Canada.
Approvals: