Fike FVA-IP, Installation And Operation Manual

Page: 26 / 56

Installation and Operation Manual FVA-IP Camera
22 P/N 06-523 (Rev. 6) Revision Date: June, 2019
The relay settings page defines when, under what event types, one of the three relays will close as well as if the relay
will be automatic (no delay) or manual (with delay), Figure 18. If manual is chosen a delay can be set in place to
provide time for the monitoring personnel to confirm, delay or reset the event. The delay time can be set from 0 to
250 seconds. To initiate a relay, select the desire event you wish the relay to activate on. The selected events will
cause the relay to switch states. This can be tested using the operator feature Camera status. The default setting is
relay one: smoke and fire alarm, relay two: trouble, and relay three auxiliary (left blank). Relay two is reversed so as to
close on loss of power and should remain a trouble contact.
Fig 18 – Relay settings are configurable.