Fike FVA-IP, Installation And Operation Manual

Page: 14 / 56

Installation and Operation Manual FVA-IP Camera
10 P/N 06-523 (Rev. 6) Revision Date: June, 2019
2.7.2 Typical Configurations
NOTE: By default, the Ethernet connection is factory‐preset for a fixed IP configuration. If your organization uses DHCP,
do not connect the camera to the network until the Network setup has been completed. Refer to section 3.5 for
details.
The typical Fike Video Analytics setup will be similar to the one shown in Figure 4 and includes the following
components: FVA‐IP Camera(s) connected by CAT‐5 cable to a network hub or LAN, connecting the monitoring
workstation running the Fike Video Analytics video management software and the FSM‐IP NVR. In addition, dry
contact connections are provided one each FVA‐IP camera so the system can be tied into a FM approved FACP. A BNC
connection is provided so a coax connection can be used with legacy systems. . Appendix B provides a diagram for
identifying and attaching the dry contact outputs.
Figure 4 ‐ Typical Fike Video Analytics Network setup for small installation: FVA‐IP Cameras, Video Management
system; Network hub /LAN; Guard station; Internet.
NOTE : This section provides information for configuring a basic system. For more information, contact your IT
representative or system administrator.