Fike FVA-IP, Installation And Operation Manual

Page: 31 / 56

FVA-IP Camera Installation and Operation Manual
Revision Date: June, 2019 P/N 06-523 (Rev. 5) 27
The Schedules feature is used to create a reoccurring or single time period that is then attached to a zone to activate or
deactivate that zone for the allotted time period. It is suggested that the Fike Video Analytics video management
software be used to set all schedules and zones once the system is in place and being commissioned. It is significantly
easier to make these changes in the video management software interface.
To create a schedule, select Create Schedule from the top of the Schedules window pane, Figure 25. You will then be
asked to set the schedule by first providing a name then defining the time period, Figure 26. The name should reflect
the schedule type so it is intuitive when attaching it to a zone. You then select:

The frequency (once, daily, weekly, monthly, yearly)

The days of the week (Monday to Sunday)

The days of the month (0‐31)

The months of the year (January to December)

And the time (0 – 1439 minutes)
If multiple days of the month or multiple time slots are needed they should be separated by commas. For example,
“1,15,30” in the days of the month slot would mean the 1
st
, 15
th
, and 30
th
of the month or 0,60,360,960 in the time slot
would mean from midnight to 1 in the morning and then from 6 am to 4 pm in the afternoon.
Fig 25 – Creating a schedule.