Point
Programming
FCP-300/FCP-300ECS Manual —
P/N LS10145-002FK-E:A 3/12/2021
101
.
9.5.3 Point Programming For FIK-5880 or 5865 Modules
To program the Model FIK-5880 or 5865 module points, do the following.
1.
Enter the Installer Code.
2.
Select 7 for Program Menu.
3.
Press 4 to enter Point Menu.
Choices
Type Selections
Function Selections
for each Type
Comments
Enter Point
Select Type
UNUSED
B NOTIF
NOTIF OUTPUT
User also has Supervised/
Unsupervised option
CONTROL CIRCUIT
A NOTIF
Same as B NOTIF
AUX_PWR
CONSTANT
Constant auxiliary power.
AUX RESET
Resettable auxiliary power.
AUX DOOR
Door holder auxiliary power.
AUX SYNC
Power Sync
Select Type
B SWITCH*
MANUAL PULL
Refer to comments column of
Table 9.5 for description of these options.
Latch or Non-latching feature only appears for
WATERFLOW, FIRE SUPERVISORY, FIRE
TAMPER, ZONE AUX1, ZONE AUX2, System AUX1,
System AUX2, ECS INPUT, ECS TAMPER, and ECS
SUPERVISORY.
WATERFLOW
FIRE SUPERVISORY
FIRE TAMPER
FIRE DRILL
SILENCE
RESET
P.A.S. ACK
ZONE AUX1
ZONE AUX2
System AUX1
System AUX2
MANUAL RELEASE
INTERLOCK
STATUS POINT
ECS INPUT
User also has ECS Event Number 1-8 option for ECS
INPUT.
Only available when an FIK-NVCM is installed in the
System.
ECS TAMPER
ECS SUPERVISORY
A SWITCH*
Same as B SWITCH
B DETECT*
2-WIRE SMOKE
Used for Class B, 2-wire detectors.
4-WIRE SMOKE
Used for Class B, 4-wire detectors.
CO 4-WIRE DET
Used for Class B, 4-wire CO detectors.
CO 4-WIRE SUP DET
Latching or Non-latching used for Class B, 4-wire CO
Supervisory detectors
A DETECT*
2-WIRE SMOKE
Used for Class A, 2-wire detectors.
4-WIRE SMOKE
Used for Class A, 4-wire detectors.
CO 4-WIRE DET
Used for Class A, 4-wire CO detectors.
Select Zone/Group
Group or Zone selection will appear depending on the
type selected.
Edit Name
See “Editing Text Using the Built-In Programmer” on
page 206.
* Only applicable for 5895XL
Table 9.6 Menu choices for Internal/External Power Module
Summary of Contents for FCP-300
Page 169: ...Cut Along the Dotted Line ...
Page 171: ...Cut Along the Dotted Line ...
Page 173: ...Cut Along the Dotted Line ...
Page 175: ...Cut Along the Dotted Line ...