1.2
INTRODUCTION
www.maxcessintl.com
DSE-45
MI 2-315 1 A
Proper use
The DSE-45 is used for non-contact measurement of the
lateral offset of a material web being guided in a customer
system. The sensor is suitable for
- Web edge guiding,
- Web center guiding, and
- Web width or edge position measurement.
The sensor can be used to control or measure both opaque and
transparent materials.
The sensor must only be used in accordance with its intended
purpose and in a technically flawless condition.
The sensor must not be changed or opened.
Improper use
Operation outside of the technical specifications is not
permitted.
Operation in areas where there is a danger of explosions is
prohibited.
The sensor may not be used as a support, handle or step.
Any use other than the designated use is not permitted.
