8.9
JOB SETTINGS
www.maxcessintl.com
DSE-45
MI 2-315 1 A
Network
TCP/IP
Use Network menus to view or edit the Ethernet IP-Address,
Subnet Mask, or Gateway. Also, use this menu to enable or
disable (ON/OFF) DHCP.
If DHCP is set to ON and the DHCP Server is not connected or
operating at the time the DSE-45 is powered up, after 30
seconds the DSE-45 adopts the currently stored IP Address so
that the system can initialize. After the DHCP Server is
connected and operating properly, all network devices
configured for DHCP must be power-cycled to allow the DHCP
Server to assign a new IP Address.
MAXNET
Use these menus to view or edit the MAXNET Address.
MAC-ID
Use this menu to view the DSE-45 MAC-ID (Physical Address).
Network menu structure
Status #
1X.8
Network
1X.8.1
TCP/IP
1X.8.1.1
IP-Address
1X.8.1.1.1
XX.8.1.2
Subnet Mask
1X.8.1.2.1
1X.8.1.3
Gateway
1X.8.1.3.1
1X.8.1.4
DHCP
1X.8.1.4.1
ON
1X.8.1.4.2
OFF
1X.8.2
MAXNET
1X.8.2.1
MAXNET Address
1X.8.2.1.1
1X.8.3
MAC-ID
Use the arrow keys to edit, then press Enter to save the setting.
(The sensor MAC-ID is displayed)
From the SE-45 Home Screen, press the ENTER key to enter the menus,
select "Network", then press ENTER.
Use the Arrow keys to highlight the desired setting, then
press Enter to save the setting.
Use the arrow keys to edit.
Use the arrow keys to edit, then press Enter to save the setting.
Use the arrow keys to edit, then press Enter to save the setting.
Figure 15. Network menu structure
