2.4
SAFETY
www.maxcessintl.com
DSE-45
MI 2-315 1 A
Preventing hazards
-
No changes may be made to the sensor.
-
Electrical lines must not be subjected to any mechanical
loads.
-
The parameters specified in
Section 11.1, Specifications
must
be observed.
-
Only accessories and replacement parts that have been
approved by Fife Tidland may be used.
-
The sensor may not be used as a support, handle or step.
There is a danger that the sensor will become damaged
(breaking off/snapping), resulting in personal injury.
The DSE-45 can be remotely controlled via a network connection.
As with any network-controlled device, when remote control of
the device is implemented, there is the possibility of movement
of the guiding structure when remote commands are issued.
Therefore, any time personnel are near the guiding structure, it is
recommended that standard safeguards be taken to prevent
injury. During servicing of the equipment, to prevent injury to
personnel, it is recommended that standard Lockout/Tagout
procedures be used.
