3
3-12
Setting up the Fiery X2 using WebSetup
You can modify both NetWare 3.x (Bindery) and NetWare 4.x (NDS) configurations
from WebSetup. Turn on the Enable NDS option if your network uses NetWare 4.x in
native mode. Click Bindery Setup if your network uses NetWare 3.x or uses
NetWare 4.x in bindery emulation mode.
N
OTE
:
If your network uses both NDS and Bindery, set up NDS first. Setting up NDS
after Bindery will overwrite Bindery Setup. If your network uses both NDS and Bind-
ery, including using NetWare 4.x servers in bindery emulation, the Fiery X2 cannot
service NDS and bindery emulation servers on the same NDS tree.
PServer Setup (NetWare Services)
The Enable PServer option must be turned on if you have a Novell server connected.
You can, however, change the PServer polling interval and then modify either Bindery
Setup or NDS Configuration.
PServer Setup (NDS Configuration
)
In initial setup, the Fiery X2 was connected to the network and an NDS directory tree,
with a Printer, a Print Server, and one or more Print Queue objects for Fiery X2 jobs
(see page 4–4), was configured. You can make any changes to that setup through
WebSetup. To modify NDS Setup you may need permission to browse the NDS tree.
If access to the Print Server is restricted, you’ll need a login password.
Note that the terms NetWare server, Novell server, and IPX server are in common use
and are used here interchangeably to mean the server on an IPX network running
Novell NetWare networking software.
Enable NDS
NDS has already been enabled. Uncheck this box only to remove NDS support.
Change Trees...
Click to open the Add NDS Tree window.