Fieldmann FZD 5010 E, User Manual

Page: 12 / 108

EN 12
FZD 5010 E
Operating the shredder
2. Remove the material that clogged the shredder.
3. Allow the motor to cool down for at least five minutes!
4. Press the safety fuse button (Fig. 5, point 4).
5. Reconnect the electrical power supply.
6. Turn on the shredder.
ATTENTION:
To prevent accidents, to remove jammed objects, always use a hook or a stick.
Collection box
Always turn the shredder off and disconnect it from the power supply before attaching or removing the
collection box.
For safety reasons, the handle of the collection box (Fig. 1, point 5) is equipped with a safety lock.
For safe operation, check the working order of the safety lock after every two hours of work.
Never attempt to put the safety lock of the handle out of operation.
Handle of the collection box:
Handle in the lowered position
>>> the collection box is not locked. The safety lock is activated,
the shredder cannot be started.
Handle in the raised position >>> the collection box is locked and the shredder is ready for work.
NOTE: The machine will not start if the collection box is unlocked. The machine will automatically turn off
when the collection box is released during operation.
Cutting roller cover (Fig. 1, point 11)
ATTENTION:
Make sure that the machine is turned off and disconnected from the power supply before opening the cutting
roller cover.
Be careful, the cutting roller does not stop immediately after the machine is stopped. Wait until all
components have stopped moving.
Put on protective gloves before opening the cover.
After removing the cover, it is possible to remove the jammed material that cannot be released through the
filling funnel or by reversing the motor.