Fieldmann FZD 5010 E, User Manual

Page: 8 / 108

EN 8
FZD 5010 E
For you own safety
Never use the machine without the inserting funnel.
If the shredder becomes clogged, first turn the machine off and pull the plug out of the socket and wait for the
machine to come to a complete stop before removing the clogged material. Keep the On/Off switch clean
and free of foreign objects.
Never attempt to hold or remove shredded material while the cutting roller is in motion. Remove clogged
shredded material only when the machine is turned off.
Prevent direct contact with the rotating cutting roller. Keep hands and feet away from the openings when the
machine is running.
Do not insert your hands or other body parts or clothing into the filling chamber, ejection chute or in the
vicinity of other moving parts.
Always remove shredded material from the ejection zone before it accumulates. This will prevent the
shredder from clogging and prevent the shredded material from entering the filling funnel by recoil and
causing injuries.
No other persons or animals may stand within the radius of 3 m around the work area as they could be
injured by deflected objects.
Do not use the machine on a tiled or concrete floor. The shredded material could deflect and cause injury.
The symbols found on your machine must not be removed or covered over. Notifications on the machine that
are no longer legible must be replaced with new ones without delay.