EN
10
FZD 5010 E
Fig. 2
Fig. 3
Fig. 4
Assembling the shredder
6. ASSEMBLING THE SHREDDER
ATTENTION:
Prior to performing any work on the machine, check that it is turned off and disconnected
from the power supply.
1. Turn the shredder unit upside down and place it on
an even floor.
Then place the frame on it and securely attach
it using the 6 included screws. Then attach the
shredder legs (Fig. 2).
ATTENTION!
Pay attention to the directional
alignment of the frame. The holes for the wheel
axle must be located on the same side as the
handle of the shredder
2. Install the wheels as follows: (Fig. 3)
— Attach the axle to one of the wheels.
— Push the axle through the holes in the frame.
— Attach the second wheel on to the axle. Secure
the wheel in place by bending the cotter pin.
— Attach the wheel cover.
3. Insert the collection box. Then secure in place with
the safety lock (Fig. 4)
Summary of Contents for FZD 5010 E
