Fieldmann FZD 5010 E, User Manual

Page: 11 / 108

EN
SILENT SHREDDER USER'S MANUAL
11
7. OPERATING THE SHREDDER
WARNING: Before connecting the machine to a power source, always check that the switch is turned off.
Connecting the machine with the switch in the on position may cause it to turn on unexpectedly and result in
a serious injury.
Turning the shredder on and off (Fig. 5)
ATTENTION:
If it is not possible to turn the switch
on the machine on and off, do not work with the
machine. Have faulty switches replaced at an
authorised service centre.
Press the green button to turn the machine on
(Fig. 5, point 2).
Press the red button to turn the machine off
(Fig. 5, point 1).
ATTENTION:
In the event of a power outage, the
machine will turn off automatically. To turn it on
again, press the green button.
Forward / reverse rotation switch (Fig. 5, point 3)
ATTENTION:
Turn the shredder off before switching the forward / reverse rotation.
Forward position
Standard operation of the shredder. The cutting roller rotates forwards.
Reverse position
The cutting roller rotates in the opposite direction for the purpose of releasing jammed material.
To change the reverse rotation direction it is necessary to intermittently press the green button so that the
roller rotates. The roller will stop automatically when the green button is released.
NOTE: To shred large branches it may be necessary to repeat the forward and reverse procedure several
times.
Prior to changing the rotation direction again, always wait until the shredder comes to a complete
stop.
Protection against overload
The shredder is equipped with overload protection (Fig.5, point 4)
In the event of an overload, the motor protection will automatically disconnect the electrical circuit.
To renew functionality, proceed as follows:
1. Turn off the machine so that it is without voltage.
Operating the shredder
Fig. 5
4 1 2 3