Fiat 500x, Owner'S Handbook Manual

Page: 92 / 272

SAFETY
90
INSTALLING A CHILD
CARSEAT WITH
SEATBELTS
The Universal child restraint systems
installed with the seat belts only are
type-approved on the basis of the ECE
R44 standard and are divided into
various weight groups.
82) 83) 84) 85)
WARNING The figures are indicative
and provided for assembly purposes
only. Fit the child restraint system
according to the instructions, which
must be included.
Group 0 and 0+
Infants up to 13 kg must be carried
with a rearward facing child restraint
system of the type shown in fig. 73
which, supporting the head, does not
induce stress on the neck in the event
of sudden decelerations.
73
F1B0110C
The child restraint system is restrained
by the vehicle seat belts, as shown in
fig. 73 and it must restrain the child in
turn with its own belts.
Group 1
Children weighing from 9 to 18 kg may
be transported in forward facing child
restraint systems fig. 74.
74
F1B0111C
Group 2
Children from 15 to 25 kg may use the
vehicle seat belts directly fig. 75.
75
F1B0112C
In this case, the child restraint system
is used to position the child correctly
with respect to the seat belts so that
the diagonal belt section crosses the
child’s chest and not the neck, and the
lower part is snug on the pelvis not the
abdomen.
Group 3
For children between 22 kg and 36 kg,
there are boosters which allow the seat
belt to be worn correctly.
The fig. 76 shows the correct child
positioning on the rear seat.
76
F1B0113C
Children over 1.50 m in height can
wear seat belts like adults.
WARNING
82) Incorrect fitting of the child restraint
system may result in an inefficient
protection system. In the event of an
accident the child restraint system may
become loose and the child may be