Fiat 500x, Owner'S Handbook Manual

Page: 134 / 272

STARTING AND DRIVING
132
IMPORTANT
58) Projecting loads on the roof of the car
may interfere with the correct operation of
the camera. Before starting make sure the
load is correctly positioned, in order not to
cover the camera operating range.
59) If the windscreen must be replaced
due to scratches, chipping or breakage,
contact exclusively a Fiat Dealership.
Do not replace the windscreen on your
own, risk of malfunction! It is advisable to
replace the windscreen if it is damaged in
the area of the camera.
60) Do not tamper with nor operate on the
camera. Do not close the openings in the
aesthetic cover located under the interior
rear-view mirror. In the event of a failure of
the camera, contact a Fiat Dealership.
61)
Do not cover the operating range of
the camera with stickers or other objects.
Also pay attention to other objects on the
bonnet (e.g. a layer of snow) and make
sure they do not interfere with the camera.
62)
The camera may have limited
or absent operation due to weather
conditions such as: heavy rain, hail, thick
fog, heavy snow, formation of ice layers on
the windscreen glass.
63) Camera operation may also be
compromised by the presence of
dust, condensation, dirt or ice on the
windscreen glass, by traffic conditions
(e.g. cars that are driving not aligned
with yours, car driving in a transverse or
opposite way on the same lane, bend
with a small radius of curvature), by
road surface conditions and by driving
conditions (e.g. off-road driving). Make
sure the windscreen is always clean. Use
specific detergents and clean cloths to
avoid scratching the windscreen. The
camera operation may also be limited or
absent in some driving, traffic and road
surface conditions.
TRAFFIC SIGN
RECOGNITION
(where provided)
132) 133) 134)
64) 65) 66) 67) 68)
The system automatically detects the
recognisable road signs by means of
a sensor located on the windscreen
fig. 109:
speed limits;
no overtaking;
signs indicating the end of the
prohibitions indicated above.
109
F1B0656
The system always checks the traffic
signs indicating the current speed limit
and possible no overtaking signs.
IMPORTANT The system is designed
to read roads signs complying with the
specifications of the Vienna convention
and ENCAP 2018 requirements.
USE OF THE TRAFFIC
SIGN RECOGNITION
System switching on and off
The system may be
activated/deactivated using the menu
on Uconnect™ 7” HD LIVE and
Uconnect™ 7” HD Nav LIVE systems
(where provided).
NOTE On versions with
Uconnect™Radio , the system may
be activated/deactivated on the
instrument panel (see the “Display”
paragraph in the “Knowing the
instrument panel“ chapter).
NOTE The system will be activated
whenever the engine is started.
The system state is shown on the
instrument panel display in the “Driver
Assist” area fig. 110 (see the “Display”
paragraph in the “Knowing the
instrument panel” chapter):