25
or turning the ignition device to the
STOP position.
If the ignition device is turned to the
STOP position with the fog lights on,
they stay on when the key is turned to
the MAR position.
“Cornering Lights” function
(where provided)
The function activates with the main
beam headlights switched on with
a speed lower than 40 km/h. For
wide wheel rotation angles or at the
switching on the direction indicator,
the front fog light on the turning side
will light up to extend the night visibility
angle.
REAR FOG LIGHT
(where provided)
The button which turns the rear fog
light on and off is integrated in the light
switch.
Press the
button to turn on the rear
fog light with side lights and fog lights
on.
With rear fog lights on, the warning light
on the instrument panel will come on
at the same time.
Press the button again to switch off;
the rear fog light also switches off
automatically by switching off the
dipped beam headlights or the fog
lights or by switching the ignition device
to the STOP position.
PARKING LIGHTS
These can be turned on by turning the
light switch ring to the
position.
The
warning light switches on in
the instrument panel.
IMPORTANT NOTE Do not select
this light switch position when the car
is moving, but only to indicate that
the car is parked when prescribed by
the regulations in force in the country
where you are driving (Highway Code).
To turn the lights off, turn the light
switch ring to position
HEADLIGHTS OFF DELAY
(Follow me home)
Activation
With multifunction display and
Uconnect™ Radio
: turn the ignition
device to STOP. Within 2 minutes, pull
the left stalk to headlight flashing mode:
the headlight off delay is activated
for 30 seconds. The function can be
activated for 7 times in sequence, i.e.
up to a total of 210 seconds.
With reconfigurable multifunction
display and/or Uconnect™ 7’’
: the
headlight off delay can be set (from 0,
30, 60 to 90 seconds) in the Menu.
If the headlight off delay is set to 0
seconds, it is possible to turn on
the lights for a predefined time of
30 seconds using the main beam
headlights stalk within 2 minutes after
stopping the engine.
It is possible to turn on the lights 7
times, for a maximum of 210 seconds.
If the value set on the Menu is different
from 0, the lights can be switched of
for the predetermined time by taking
the ring from position
(with the
engine running) to position
(with the
engine off).
The function can be activated
automatically on versions with dusk
sensor: turn the ring to the
AUTO
position with the engine running. The
dipped beam headlights will be turned
on if the sensor detects a low level
of light. The headlights off delay is
enabled automatically when the ignition
device is turned to STOP with the
low beam headlights on for the time
selected in the Menu.
Deactivation
If the function is activated by using the
left steering wheel stalk, the function
can be deactivated by holding the left
lever in "main beam flashing" mode for
longer than 2 seconds or by waiting
for the deactivation time shown on the
display.
The function cannot be deactivated if
it is activated using the light line. The
headlights will be switched off at the
end of the set time.
Summary of Contents for 500x
