Fiat 500x, Owner'S Handbook Manual

Page: 151 / 272

149
turn the bulb and bulb holder
assembly anticlockwise and then
remove it sliding it outwards;
replace the bayonet-fitted bulb (A)
fig. 124;
then reassemble the inspection
flap (B) fig. 123, fully tightening fixing
screws (A).
Front direction indicators
To replace the bulbs, proceed as
follows:
steer the vehicle wheels completely
inwards;
using the screwdriver provided, undo
the screws (A) fig. 123 and remove the
inspection flap (B);
identify the direction indicator bulb;
turn the bulb and bulb holder
assembly anticlockwise and then
remove it sliding it outwards;
replace the bayonet-fitted bulb (A)
fig. 124;
finally, refit inspection flap (B)
fig. 123, completely tightening fixing
screws A.
Fog lights (halogen)
To replace the bulbs, proceed as
follows:
steer the vehicle wheels completely
inwards;
using the screwdriver provided, undo
the screws (A) fig. 123 and remove the
inspection flap (B);
identify the fog light;
turn the bulb and bulb holder
assembly anticlockwise and then
remove it sliding it outwards;
disconnect the electrical connector;
replace the bulb-bulb holder
assembly (B) fig. 124;
reconnect the electrical connector to
the new bulb-bulb holder; then insert it
making sure it is locked correctly;
insert the assembly by turning it
clockwise and locking it correctly;
then reassemble the inspection
flap (B) fig. 123, fully tightening fixing
screws (A).
Side direction indicators
IMPORTANT The procedure is
described by way of example only. It is
advisable to contact a Fiat Dealership
for bulb replacement.
To replace the bulb, proceed as
follows:
remove cover (B) fig. 125 of the door
mirror very carefully (using suitable
equipment in order not to damage the
paintwork) around the frame of the
mirror itself (as shown in the figure);
125
F1B0149C
remove the lens (A) and then
remove the bulb (C) pulling it from the
respective bulb holder.
fit the new bulb, making sure it is
correctly locked;
refit bulb holder on the lens (A);
refit cap (B) on the door mirror
correctly, ensuring that it locks
correctly.