Fiat Kobelco EX355 Tier2, Technical Manual

Page: 853 / 968

EX355 W5-3-73
ENGINE OVERHAUL
3. After pressing in the slinger, make sure that the
distance between crankshaft end surface and
the slinger is A as specified.
Distance (A): 16.7 - 17.3mm (0.657 - 0.681 in)
NOTE: Be sure to replace the slinger and oil seal as
a set.
5. Use the oil seal installer 894396-8560 to install the
oil seal.
1. Apply engine oil to the oil seal lip. Do not allow
engine oil to come in contact with the outside oil
seal and felt ring.
2. Insert the oil seal ( 1 ) into the adapter ( 2 ).
3. Insert the oil seal sleeve ( 3 ) to the adapter.
4. Tighten the center bolt until the sleeve comes
into contact with the adapter stopper.
5. After pressing the oil seal, make sure that the
distance between crankshaft end surface and
the oil seal is B as specified.
Distance (B): 7.35 - 7.65 mm (0.289 - 0.301 in)
SM7182
SM7183
SM7184
SM7185
4. Install the rear stinger using the oil seal installer
894396-8560.
1. Install the stinger (
1 ) to the end of adapter ( 2 ).
Install the adapter to the crankshaft ( 3 ).
NOTE: The rear stinger is gray and the front stinger
is black.
2. Install the stinger sleeve ( 4 ) to the adapter.
Tighten the center bolt ( 5 ) until the sleeve
comes in contact with the adapter stopper.