EX355
W3-2-9
TRAVEL DEVICE
36
SM1082
75301496
75301497
75301495
7. Warm the inner race of roller bearing (
31
) 50 to
70 °C (122 to 158 °F) using a heater. Install it
between drum (
32
) and housing (
44
). Wait for the
inner race to cool. Then, drive it into position
completely using a metal bar and a hammer.
8. Install bearing nut (
36
) to housing (
44
), with the
uneven surface side towards the hub and tighten
manually.
9. Secure the travel device immovable. Attach the
special tools to bearing nut (
36
). Then, tighten it
using a torque wrench.
Special Tools:
75301495
,
75301496
,
75301497
Bolt:
M16 (60 to 90 mm in length) (2 pieces)
: 785 N m (80 kgf m, 580 lbf ft)
Assemble Travel Device
1. Align the travel motor (
29
) with the aligment mark
on the housing (
44
) and install it with bolts (
37
)
(4 Used) and spring washers (
35
) (4 Used).
: 14 mm
: 294 N m (30 kgf m, 215 lbf ft)
2. If replacing roller bearing (
31
), warm the inner race
50 to 70 °C (122 to 158 °F) using a heater, then
install it into housing (
44
). Wait for the inner race to
cool. Then, drive it in position completely using a
metal bar and a hammer.
3. Install one half of floating seal (
30
) on housing (
44
).
NOTE -
For easier insertion of floating seal O-ring, use
wooden spatula to guide it along the periphery.
4. Install the outer race of roller bearing (
31
) on drum
(
32
) in position completely using a metal bar and a
hammer.
Install the half floating seal (
30
) into drum (
32
).
WARNING
Sprocket weight: Approx. 68 kg (150 lb)
5. Mount sprocket (
38
) on drum (
32
). Apply LOCTITE
262 to bolts (
34
). Tighten bolts (
34
) and spring
washer (
33
).
: 30 mm
: 490 N m (50 kgf m, 362 lbf ft)
WARNING
Weight of drum and sprocket combined:
Approx. 137 kg (302 lb)
6. Attach eyebolts (
75301486
) to drum (
32
) then
install drum (
32
) onto housing (
44
) with motor (
29
),
using a hoist.
Summary of Contents for EX355 Tier2
