5
Specifications
For qualified service technicians
.
EXPORT AND CE-Electrical Configurations
Configuration
Code
Heater
Configuration
Voltage
Phase
Wires
Electrical
Connection
W
Maximum
Amp draw
Flow Rate
Per hour*
H210240CE
1 X 3.2 KW
230
single L ,N, PE
3030
13.8 31.0
liters/8.2gal
*Flow rate based on 55°F/13°C water mains supply
and dispensing
From (“READY” Light ON)
Portion Control: factory calibrated at 5sec—the dispense portion of 200ml/6.8oz.
Portion size is controlled by dispense time. Range: 1 sec to maximum single dispense is 1200ml/40.5 ounces in 30seconds (maximum dispense time).
Dimensions & Utility Connections
Designs, materials, specifications, physical dimensions, firmware and software protocol for equipment or replacement parts are subject to review and change by FETCO without notice
Weights and Capacities
Brewer / Dispenser Model
Weight
(empty)
Water tank
Capacity
Weight
(filled)
Hot Water Boiler HWD-2102
8.6 kg/19 lb
6.9 liter/1.8 gallon
14.8 kg/32.6lb
Water Requirements
Pressure: 20-75 psig (0.138-0.517mPa) (45/0.310 psi/kPa is preferred) Minimum Flow Rate: 1½ gpm
All commercial hot water dispensers to be supplied with filtered water
Water connection inlet: 3/8 inch male flare fitting.
