A perfect drawer with through
dovetails in under fifteen
minutes
.
Because you have to use two
different templates, two
different guide bushings, two
different router bits and do
two set-ups to make through
dovetail joints, it will take
about fifteen minutes per
drawer instead of the five
minutes per drawer required
for half blind dovetail joints.
In both cases your drawer will
be “perfect” right out of the
VS-600 joining system. It will
be exactly the length, width
and depth you want it to be,
will be absolutely square, sit
flat and invoke an image of
fine craftsmanship from the
minute you assemble it.
No sanding to fit, no “make it
a bit bigger and cut it to fit
afterwards” and no “put a bit
of filler into the gaps to make
it look like it fits” even when it
doesn’t.
28
