58
Festo — YXCR — 2021-07b
Assembly
5. Evenly tighten the 8 screws of the upper profile mountings
2
and lower profile mountings
3
on
the left and right X-Y adapters.
Ä
Check:
–
The upper profile mountings are in contact with the stop edges of the X-Y adapters.
–
Clearances A and B are maintained.
6. Move the Y-module by hand over the complete stroke length of the X-module.
Ä
The detached guide axis is aligned stress-free and parallel to the mounted drive axis of the
X-module.
7. Push the Y-module into the centre of the X-axes.
