Festo — YXCR — 2021-07b
Assembly
67
3. On the drive sides of the X-axes:
Insert a screwdriver into the cut-outs in the coverings. Remove the coverings on the hollow shafts.
Ä
The connecting shaft may only be mounted on the drive sides of the X-axes.
Mounting at the opposite ends of the X-axes is not permissible and would cause collisions.
4. Push the slides into the motor-side end position of the X-axes.
Ä
The hollow shafts no longer turn when the clamping screws are tightened.